Top 10 Best Rack Mount Multi Effects Processor [2022]

Last Update:

You can trust our selection for Rack Mount Multi Effects Processor Reviews. Because We have worked hard studying and analyzing 41936 reviews for Rack Mount Multi Effects Processor and rating them. It was a difficult job to list only ten products for Rack Mount Multi Effects Processor where thousands of them available online. I hope it will help you to take final decision for Best Rack Mount Multi Effects Processor.

Comparison Chart for Best Rack Mount Multi Effects Processor

41936 number of user reviews were available online, which we scanned to find the Rack Mount Multi Effects Processor. Hopefully, our experts suggestions available in this article will help you find your ideal choice.

NoProductScoreAction
1Behringer Rack Mount Exciter Processor (SX3040 V2)9.8Check Price on Amazon
2BEHRINGER, Silver & Black (FX2000)9.8Check Price on Amazon
3BOSS Guitar Effects Processor9.8Check Price on Amazon
4Behringer Super-X PRO CX2310 Multi Effect Processor V29.6Check Price on Amazon
5TC ELECTRONIC M1009.2Check Price on Amazon
6Behringer Multi Effect Processor (RX1202FX V2)9.2Check Price on Amazon
7dbx DriveRack PA 29Check Price on Amazon
8Behringer Rack Mount Mixer (RX1602 V2)9Check Price on Amazon
9Tascam TA-1VP Rackmount Vocal Producer Processor With Antares Autotune8.6Check Price on Amazon
10Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output8.2Check Price on Amazon
Disclaimer: As an Amazon Associate I Earn from Qualifying Purchases. But that doesn't change the price.

Table Of Content:

1. Behringer Rack Mount Exciter Processor (SX3040 V2)

  • Dramatically improves your sound by adding clarity, dimension and depth
  • Produces natural brightness through harmonic enhancement and tighter bass with increased punch through phase compensation.
  • Professional and home recording studios: brings out the full sound spectrum of your tracks, mix down and mastering.
  • Pa, Nightclub and DJ systems: improves the performance of any sound system by adding sparkling high end and super-tight bass without the need for additional speakers or amps.
  • Churches and houses of worship: dramatically increases voice intelligibility and your music gains presence.

2. BEHRINGER, Silver & Black (FX2000)

  • 71 breathtaking new algorithms—true RSM (Real Sound Modeling) stereo and 3D effects
  • Wave-adaptive virtual Room reverb algorithms for natural reverb and delay
  • Awesome modulation, dynamic, psychoacoustic and EQ algorithms
  • Authentic amp simulation, distortion and special effects
  • 11 effect combinations with selectable serial / parallel configuration

3. BOSS Guitar Effects Processor

  • Premium BOSS sound engine squeezed into a light and compact floor unit
  • Modern design with no hard edges enables safe transport in a guitar bag
  • Easy select and easy edit functions for quickly choosing and tweaking Patches
  • Four AA batteries provide up to seven hours of playing time for busking and mobile gigs
  • Onboard control switch and expression pedal; footswitch/expression pedal jack and USB

4. Behringer Super-X PRO CX2310 Multi Effect Processor V2

  • Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art linkwitz-riley filters with 24 dB/octave.
  • Additional subwoofer output with independent frequency control
  • Absolutely flat summed amplitude response, Zero phase difference
  • Individual output gain controls for all bands
  • Individual output mute switches for easy band adjustment

5. TC ELECTRONIC M100

  • Stereo multi-effects processor for studio and stage applications
  • 16 award-winning TC effects including reverb, delay, chorus, flanger, phaser, rotary speaker, pitch shifter and multi-effects.
  • Versatile Edit and Tap/Select functions to control a wide range of parameters
  • Stereo Input Level control with LED level indication
  • Dedicated Mix Balance and Output Level controls for perfect level adjustment

6. Behringer Multi Effect Processor (RX1202FX V2)

  • Premium ultra-low noise, high headroom analog 3U rack mount mixer
  • 8 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
  • Neo-classic “British” 2-band EQs for warm and musical sound
  • Studio-grade FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects.
  • Switchable +48 V phantom power for condenser microphones

7. dbx DriveRack PA 2

  • New, improved Auto EQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.
  • Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.
  • Wizard functions on the Drive Rack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system.
  • 2 female XLR line inputs; 1 female XLR RTA mic input
  • 6 male XLR line outputs

8. Behringer Rack Mount Mixer (RX1602 V2)

  • Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
  • 16 balanced high-headroom line inputs for individual stereo or mono use of each section
  • Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
  • Dedicated balance and level controls plus +4/-10 level selection per channel

9. Tascam TA-1VP Rackmount Vocal Producer Processor With Antares Autotune

  • Co-developed with Antares Audio Technologies to bring together everything you need for a polished, modern vocal sound, in the studio or live.
  • The rackmount processor includes a mic preamp, compression, de-essing, mic & tube modeling and Antares’ famous Auto-Tune pitch correction.
  • Perfect for live performance, house of worship or studio use, the TA-1VP brings your vocal sound into the 21st century.
  • A high-quality XLR microphone input is provided on the TA-1VP front panel, with phantom power for condenser mics.
  • Balanced TRS input and outputs are located on the rear panel, including a Double Track out for simulating doubled vocals.
  • Processing is laid out in simple-to-use blocks, each with dedicated buttons and meters to show exactly what’s being done to the signal.
  • The Auto-Tune module can be set for any level of pitch correction, in a variey of user-selectable scales.

10. Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output

  • Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output.
  • 1/3 octave filter sets (ISO centers).
  • Bypass switch with status LED.
  • Frequency Centers: 20 Hz, 25 Hz, 31.
  • Control Range: Selectable +/-12dB 0r +/-6dB.

Rack Mount Multi Effects Processor Buying Guide


Does the thought of finding a great Rack Mount Multi Effects Processor stress you out? Has your mind been juggling between choices when it comes to buying Rack Mount Multi Effects Processor in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Rack Mount Multi Effects Processor for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Rack Mount Multi Effects Processor Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Rack Mount Multi Effects Processor in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Rack Mount Multi Effects Processor currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Rack Mount Multi Effects Processor brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Rack Mount Multi Effects Processor based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Rack Mount Multi Effects Processor before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Rack Mount Multi Effects Processor they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Rack Mount Multi Effects Processor, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Rack Mount Multi Effects Processor before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Rack Mount Multi Effects Processor will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Rack Mount Multi Effects Processor if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Rack Mount Multi Effects Processor on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Rack Mount Multi Effects Processor on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Rack Mount Multi Effects Processor featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.